J-CAT LYRA
DESKTOP SOLDERING ROBOT
The J-CAT LYRA is a new soldering robot with significantly improved base operational features, increased usability and durability.
Advanced Temperature Settings Iron tip temperature can be set individually for each soldering point within the same program. As a result, high-quality soldering of components with different heat capacities, reliable filling of through-hole and perfect back fillets can be achieved.
Advanced Temperature Setting
Iron tip temperature can be set individually for each soldering point within the same program. As a result, high-quality soldering of components with different heat capacities, reliable filling of through-hole and perfect back fillets can be achieved.
Approach Function
The approach function allows fro the programming of an additional axis movement during soldering. This helps to make programming and setup faster and easier for point teaching and also saves intitial setup time.
Dual Iron Units & Feeder (Option)
The high-powered controller can operate two feeder units at the same time. This provides for a reduction in cycle time by 50%. Two iron untis can also be untilized as an option, which is beneficial for soldering high heat capacity components.
| TYPE | J-CAT 320 LYRA | J-CAT 330 LYRA | J-CAT 340 LYRA | |
|---|---|---|---|---|
| Drive Method | 5-phase stepping motor | |||
| Encoder | 4-axes Applicable | |||
| Resolution | X, Y, Z Axes | 0.01 mm | ||
| R Axis | 0.08° | |||
| Operation Range | X, Y Axes | 200×200 mm | 300×320 mm | 400×400 mm |
| Z Axis | 50 mm | 100 mm | 150 mm | |
| R Axis | ±360 ° | |||
| Portable Weight | 7 kg | 15 kg | ||
| Maximum Speed | X, Y Axes | 700mm/sec. | 900mm/sec. | |
| Z Axis | 250mm/sec. | 400 mm/sec. | ||
| R Axis | 600°/sec. | 900°/sec. | ||
| Repeatability | X, Y, Z Axes | ±0.01mm | ||
| R Axis | ±0.008° | |||
| Teaching Method | Remote Teaching (JOG) | |||
| Manual Data Input (MDI) | ||||
| External Input/Output | Input :16 Output:16 | |||
| Program Capacity | 999 programs | |||
| Memory Capacity | 32,000 point | |||
| Soldering Condition | Point and slide total; 500 conditions | |||
| Setting Temperature | 0~500℃ | |||
| Solder Feeding Speed | 1.0~50.0 mm/sec | |||
| Solder Feeding Amount Resolution | 0.1 mm | |||
| Solder Diameter | With ZSB Feeder | φ0.4~φ1.0mm (Option: φ0.3, 1.2, 1.6mm) | ||
| With Normal Feeder | φ0.3~φ1.6mm | |||
| Heater Capacity | 130W | |||
| Air Supply | 0.4~0.5MPa (Dry & clean air) | |||
| Nitrogen Generator | Available (Option: APN-05) | |||
| Display Language | English, Chinese, Korean, Japanese, French, Spanish, German, Italian, Japanese, Czech, Vietnamese | |||
| Power Source | AC94~260V (Single phase) | |||
| Power Consumption | 400W | |||
| Dimensions (WxDxH, in mm) | 440x453x818mm | 684x600x872mm | 679x660x897mm | |
| Weight (kg) | 30 | 46 | 54 | |